×

企業版

更多

開始創作

歷史記錄

Positive prompt

seed

width

height

已經到底啦

empty

暫無數據

原創

ST2_FLUX_TURBO_HIGH Quality

5

評價

S

關註

2024-12-12 20:10:14 更新

229

收藏

快速收藏並稍後整理

未整理的收藏

保存到收藏夾

推薦

創建收藏夾

創建收藏夾

2

34

分享

進入 ComfyUI

進入發布頁

收起

查看生圖信息

縮略圖展示

默認展示

保存該組圖片

刪除該組圖片

This workflow can make very fast flux images by using the flux Turbo, BUT it also makes high quality images, because there is a two part creation first 0-8 steps then another ksampler that goes from 8-12 (You can try more it'll juyst go slower), in between the two Ksamplers there is a bit of optimization that get's rid of the patterns that flux likes to make, then it goes in to another optimisation followed by the Ultimate upscaler, This part is a bit slower but it is totally worth it. Try the basic one before you change any and look out, if you want to up the steps in the second Ksampler you need to change the endstep to the same nr, and also the optimaizations you can play with them just don't change 10 things in a row, try them one at a time till you get what you like.

<br>The loras in the yellow part you can add/change to your liking and if you do not want to use the GGUF models there are two nodes that you need to connect instead of the GGUF and then you can choose your FLUX model

This workflow can make very fast flux images by using the flux Turbo, BUT it also makes high quality images, because there is a two part creation first 0-8 steps then another ksampler that goes from 8-12 (You can try more it'll juyst go slower), in between the two Ksamplers there is a bit of optimization that get's rid of the patterns that flux likes to make, then it goes in to another optimisation followed by the Ultimate upscaler, This part is a bit slower but it is totally worth it. Try the basic one before you change any and look out, if you want to up the steps in the second Ksampler you need to change the endstep to the same nr, and also the optimaizations you can play with them just don't change 10 things in a row, try them one at a time till you get what you like.

<br>The loras in the yellow part you can add/change to your liking and if you do not want to use the GGUF models there are two nodes that you need to connect instead of the GGUF and then you can choose your FLUX model

This workflow can make very fast flux images by using the flux Turbo, BUT it also makes high quality images, because there is a two part creation first 0-8 steps then another ksampler that goes from 8-12 (You can try more it'll juyst go slower), in between the two Ksamplers there is a bit of optimization that get's rid of the patterns that flux likes to make, then it goes in to another optimisation followed by the Ultimate upscaler, This part is a bit slower but it is totally worth it. Try the basic one before you change any and look out, if you want to up the steps in the second Ksampler you need to change the endstep to the same nr, and also the optimaizations you can play with them just don't change 10 things in a row, try them one at a time till you get what you like.

<br>The loras in the yellow part you can add/change to your liking and if you do not want to use the GGUF models there are two nodes that you need to connect instead of the GGUF and then you can choose your FLUX model

This workflow can make very fast flux images by using the flux Turbo, BUT it also makes high quality images, because there is a two part creation first 0-8 steps then another ksampler that goes from 8-12 (You can try more it'll juyst go slower), in between the two Ksamplers there is a bit of optimization that get's rid of the patterns that flux likes to make, then it goes in to another optimisation followed by the Ultimate upscaler, This part is a bit slower but it is totally worth it. Try the basic one before you change any and look out, if you want to up the steps in the second Ksampler you need to change the endstep to the same nr, and also the optimaizations you can play with them just don't change 10 things in a row, try them one at a time till you get what you like.

<br>The loras in the yellow part you can add/change to your liking and if you do not want to use the GGUF models there are two nodes that you need to connect instead of the GGUF and then you can choose your FLUX model

This workflow can make very fast flux images by using the flux Turbo, BUT it also makes high quality images, because there is a two part creation first 0-8 steps then another ksampler that goes from 8-12 (You can try more it'll juyst go slower), in between the two Ksamplers there is a bit of optimization that get's rid of the patterns that flux likes to make, then it goes in to another optimisation followed by the Ultimate upscaler, This part is a bit slower but it is totally worth it. Try the basic one before you change any and look out, if you want to up the steps in the second Ksampler you need to change the endstep to the same nr, and also the optimaizations you can play with them just don't change 10 things in a row, try them one at a time till you get what you like.

<br>The loras in the yellow part you can add/change to your liking and if you do not want to use the GGUF models there are two nodes that you need to connect instead of the GGUF and then you can choose your FLUX model

This workflow can make very fast flux images by using the flux Turbo, BUT it also makes high quality images, because there is a two part creation first 0-8 steps then another ksampler that goes from 8-12 (You can try more it'll juyst go slower), in between the two Ksamplers there is a bit of optimization that get's rid of the patterns that flux likes to make, then it goes in to another optimisation followed by the Ultimate upscaler, This part is a bit slower but it is totally worth it. Try the basic one before you change any and look out, if you want to up the steps in the second Ksampler you need to change the endstep to the same nr, and also the optimaizations you can play with them just don't change 10 things in a row, try them one at a time till you get what you like.

<br>The loras in the yellow part you can add/change to your liking and if you do not want to use the GGUF models there are two nodes that you need to connect instead of the GGUF and then you can choose your FLUX model

This workflow can make very fast flux images by using the flux Turbo, BUT it also makes high quality images, because there is a two part creation first 0-8 steps then another ksampler that goes from 8-12 (You can try more it'll juyst go slower), in between the two Ksamplers there is a bit of optimization that get's rid of the patterns that flux likes to make, then it goes in to another optimisation followed by the Ultimate upscaler, This part is a bit slower but it is totally worth it. Try the basic one before you change any and look out, if you want to up the steps in the second Ksampler you need to change the endstep to the same nr, and also the optimaizations you can play with them just don't change 10 things in a row, try them one at a time till you get what you like.

<br>The loras in the yellow part you can add/change to your liking and if you do not want to use the GGUF models there are two nodes that you need to connect instead of the GGUF and then you can choose your FLUX model

This workflow can make very fast flux images by using the flux Turbo, BUT it also makes high quality images, because there is a two part creation first 0-8 steps then another ksampler that goes from 8-12 (You can try more it'll juyst go slower), in between the two Ksamplers there is a bit of optimization that get's rid of the patterns that flux likes to make, then it goes in to another optimisation followed by the Ultimate upscaler, This part is a bit slower but it is totally worth it. Try the basic one before you change any and look out, if you want to up the steps in the second Ksampler you need to change the endstep to the same nr, and also the optimaizations you can play with them just don't change 10 things in a row, try them one at a time till you get what you like.

<br>The loras in the yellow part you can add/change to your liking and if you do not want to use the GGUF models there are two nodes that you need to connect instead of the GGUF and then you can choose your FLUX model

This workflow can make very fast flux images by using the flux Turbo, BUT it also makes high quality images, because there is a two part creation first 0-8 steps then another ksampler that goes from 8-12 (You can try more it'll juyst go slower), in between the two Ksamplers there is a bit of optimization that get's rid of the patterns that flux likes to make, then it goes in to another optimisation followed by the Ultimate upscaler, This part is a bit slower but it is totally worth it. Try the basic one before you change any and look out, if you want to up the steps in the second Ksampler you need to change the endstep to the same nr, and also the optimaizations you can play with them just don't change 10 things in a row, try them one at a time till you get what you like.

<br>The loras in the yellow part you can add/change to your liking and if you do not want to use the GGUF models there are two nodes that you need to connect instead of the GGUF and then you can choose your FLUX model

This workflow can make very fast flux images by using the flux Turbo, BUT it also makes high quality images, because there is a two part creation first 0-8 steps then another ksampler that goes from 8-12 (You can try more it'll juyst go slower), in between the two Ksamplers there is a bit of optimization that get's rid of the patterns that flux likes to make, then it goes in to another optimisation followed by the Ultimate upscaler, This part is a bit slower but it is totally worth it. Try the basic one before you change any and look out, if you want to up the steps in the second Ksampler you need to change the endstep to the same nr, and also the optimaizations you can play with them just don't change 10 things in a row, try them one at a time till you get what you like.

<br>The loras in the yellow part you can add/change to your liking and if you do not want to use the GGUF models there are two nodes that you need to connect instead of the GGUF and then you can choose your FLUX model

相關推薦

相關作品

182

評論

全部

全部
天
周
月

最新

熱門
最新

empty

暫無數據

登錄後查看全部作品

立即登錄

共 0 條評論

中文-繁體

應用

創作圖像數字人快捷AI 模型訓練高級畫板快應用工作流

關於

實驗室排行榜 AI聊天 AI博客 AI新聞

幫助

獲取應用

Download on the

關註我們

© 2024 SeaArt, Inc.

《隱私政策》

特定商取引法

資金決済法に基づく表示

DMCA 《條款》《隱私政策》特定商取引法資金決済法に基づく表示

更多